MQTT Alarm Control Panel
Reuse and old Android devices as a home alarm control panel that integrates with Home Assistant or any home automation platform that supports MQTT messaging.
MQTT Alarm Control Panel is an alarm control panel for use with home automation platforms that support MQTT messaging. The application was originally built for Home Assistant'sMQTT Manual Control Panel. However, the application can be used with any home automation platform that supports the MQTT messaging protocol such as Jeedom, openHab, or Node-Red.
The alarm control panel acts as an interface for your home alarm system and allows for two way communication using MQTT. You can set the alarm state to away or home, or disarm the alarm using a code. Your home automation system controls the sensors or automation that triggers the siren or notifies users of possible intrusion.
Features
* Stream video, detect motion, detect faces, and read QR Codes.
* Capture and emailing images when the alarm is disabled.
MQTT commands to remotely control the application (speak text, play audio, display notifications, alerts).
* Device sensor data reporting over MQTT (temperature, light, pressure, battery, etc.).
* Day/Night mode themes based on MQTT sun value.
* Fingerprint unlock support to disable the alarm. (on supported devices).
* Optional screensaver mode using a digital clock or Imgur images.
* Three day MQTT Weather forecast.
* Home Automation Platform webpage support for viewing home automation dashboards.
The alarm panel is designed to be used as a dedicated device which runs continuously in full-screen mode. The alarm panel is open source and available on GitHub. There is also a version that runs on a Raspberry Pi using Android Things
For the complete setup instructions and additional information, please visit the Project Home Page.
Home Assistant
Home Assistant's MQTT Manual Alarm Control Panel
Project's Home Page
Raspberry Pi Version
Support: mister@thanksmister.com
کنترل پنل آلارم MQTT
استفاده مجدد از دستگاه های قدیمی آندروید به عنوان یک پانل کنترل زنگ خانگی که با Home Assistant یا هر پلتفرم اتوماسیون خانگی که از پیام MQTT پشتیبانی می کند، ادغام می شود.
MQTT Alarm Control Panel یک کنترل پنل زنگ برای استفاده با سیستم عامل های اتوماسیون خانگی است که از پیام MQTT پشتیبانی می کند. این برنامه در ابتدا برای MQTT پانل کنترل دستی Home Assistant ساخته شده است . با این حال، برنامه را می توان با هر پلتفرم اتوماسیون خانگی که از پروتکل های پیام رسانی MQTT مانند Jeedom، openHab یا Node-Red پشتیبانی می کند استفاده می کند.
پانل کنترل پانل به عنوان رابط برای سیستم زنگ خطر خانه شما عمل می کند و اجازه می دهد تا برای برقراری ارتباط دو جانبه با استفاده از MQTT. شما می توانید حالت هشدار را به دور یا خانه تنظیم کنید یا زنگ هشدار را با استفاده از کد خلع سلاح کنید. سیستم اتوماسیون خانگی شما سنسورها یا اتوماسیون را کنترل می کند که موجب آژیر شدن یا اطلاع کاربران از نفوذ احتمالی می شود.
ویژگی ها
* جریان ویدئو، تشخیص حرکت، تشخیص چهره، و خواندن کدهای QR.
* ضبط و ارسال تصاویر هنگام زنگ زدن غیرفعال است.
MQTT دستورات از راه دور برنامه را کنترل می کند (صحبت کردن متن، پخش صوت، نمایش اطلاعیه ها، هشدارها).
* اطلاعات سنسور دستگاه نسبت به MQTT (دما، نور، فشار، باتری و غیره) گزارش می شود.
* تم های شبانه روز / شب بر اساس ارزش آفتاب MQTT.
* اثر انگشت باز کردن پشتیبانی برای غیر فعال کردن زنگ. (در دستگاه های پشتیبانی شده).
* حالت محافظ صفحه نمایش اختیاری با استفاده از ساعت دیجیتال یا تصاویر Imgur.
* سه روز MQTT پیش بینی آب و هوا.
* پشتیبانی صفحه اصلی سیستم عامل صفحه اصلی برای مشاهده داشبورد اتوماسیون خانگی.
پانل زنگ هشدار برای استفاده به عنوان یک دستگاه اختصاصی استفاده می شود که به طور مداوم در حالت تمام صفحه اجرا می شود. پانل هشدار منبع باز است و در GitHub در دسترس است. همچنین نسخه ای است که بر روی Raspberry Pi با استفاده از چیزهای Android اجرا می شود
برای دستورالعمل کامل نصب و اطلاعات بیشتر، لطفا صفحه اصلی پروژه را ببینید.
دستیار خانه
راهنمای کنترل دستی آلارم MQTT دستیار خانگی
صفحه اصلی پروژه
نسخه تمشک پی »
پشتیبانی: mister@thanksmister.com
MQTT Alarm Control Panel
Reuse and old Android devices as a home alarm control panel that integrates with Home Assistant or any home automation platform that supports MQTT messaging.
MQTT Alarm Control Panel is an alarm control panel for use with home automation platforms that support MQTT messaging. The application was originally built for Home Assistant'sMQTT Manual Control Panel. However, the application can be used with any home automation platform that supports the MQTT messaging protocol such as Jeedom, openHab, or Node-Red.
The alarm control panel acts as an interface for your home alarm system and allows for two way communication using MQTT. You can set the alarm state to away or home, or disarm the alarm using a code. Your home automation system controls the sensors or automation that triggers the siren or notifies users of possible intrusion.
Features
* Stream video, detect motion, detect faces, and read QR Codes.
* Capture and emailing images when the alarm is disabled.
MQTT commands to remotely control the application (speak text, play audio, display notifications, alerts).
* Device sensor data reporting over MQTT (temperature, light, pressure, battery, etc.).
* Day/Night mode themes based on MQTT sun value.
* Fingerprint unlock support to disable the alarm. (on supported devices).
* Optional screensaver mode using a digital clock or Imgur images.
* Three day MQTT Weather forecast.
* Home Automation Platform webpage support for viewing home automation dashboards.
The alarm panel is designed to be used as a dedicated device which runs continuously in full-screen mode. The alarm panel is open source and available on GitHub. There is also a version that runs on a Raspberry Pi using Android Things
For the complete setup instructions and additional information, please visit the Project Home Page.
Home Assistant
Home Assistant's MQTT Manual Alarm Control Panel
Project's Home Page
Raspberry Pi Version
Support: mister@thanksmister.com